Motorola RFS Series User Manual

Motorola RF Switch CLI Reference Guide
20-30
20.1.14 broadcast-tx-speed
 Wireless Configuration Commands
Configure the rate at which broadcast and multicast traffic is transmitted between the
switch and mobile unit
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
broadcast-tx-speed [range|throughput]
Parameters
Example
RFSwitch(config-wireless)#broadcast-tx-speed range
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#broadcast-tx-speed throughput
RFSwitch(config-wireless)#
range Uses a lowest basic rate, but provides the maximum range
(default)
throughput Uses a highest basic rate, but provides the maximum
throughput

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English