Smart RF Instance
25-7
• RFS4000
Syntax
help
Parameters
None
Example
RFS7000(config-wireless-smart-rf)#help
CLI provides advanced help feature. When you need help,
anytime at the command line please press '?'.
If nothing matches, the help list will be empty and you must
backup until entering a '?' shows the available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
command argument (e.g. 'show ?') and describes each possible
argument.
2. Partial help is provided when an abbreviated argument is
entered and you want to know what arguments match the input
(e.g. 'show ve?'.)
RFS7000(config-wireless-smart-rf)#
25.1.8 hold-time

Smart RF Instance
Defines the number of seconds to disable interference avoidance after a detection
This prevents a radio from changing channels continuously.
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
hold-time <30-65535>
To Next Page
Loading...
Need help?
General
