Wireless Instance
20-27
20.1.11 ap-timeout
Wireless Configuration Commands
Changes the default inactivity timeout for access ports
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ap-timeout <index> <timeout>
Parameters
Example
RFSwitch(config-wireless)#ap-timeout 1 40
RFSwitch(config-wireless)#
<index> <timeout>
• <index> – Access-ports identified by a single index or by
a list of indices. Use show wireless ap to view the AP’s
index or MAC address
• <timeout> – Sets the new inactivity timeout (in seconds)
to a value between 40 and 180.
To Next Page
Loading...
