Motorola RF Switch CLI Reference Guide
5-130
5.1.41 wireless
Global Configuration Commands
Configures switch wireless parameters
This command moves you to the
config-wireless instance. For more information, see
Chapter , Wireless Instance.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
wireless
Parameters
None
Usage Guidelines
The wireless command is used to enter the config-wireless instance wherein you can
configure wireless parameters. Confirm you have entered the wireless instance, as the
prompt changes from the regular
RFSwitch(config)# to RFSwitch(config-
wireless)#.
Example
RFSwitch(config)#wireless
RFSwitch(config-wireless)#
To Next Page
Loading...
