Motorola RFS Series User Manual

Motorola RF Switch CLI Reference Guide
9-8
9.1.6 show
 Crypto IPSec Config Commands
Use this command to view current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show <paramater>
Parameters
Example
RFSwitch(config-crypto-ipsec)#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the
system
autoinstall autoinstall configuration
banner Display Message of the Day Login
banner
boot Display boot configuration.
clock Display system clock
commands Show command lists
crypto encryption module
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 :
• port-channel
• static-channel-group
? Displays all the parameters for which information can be
viewed using the show command

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English