Radius Server Instance
19-7
19.1.4 crl-check

Radius Configuration Commands
Enables a Certificate Revocation List (CRL) check
To enable the certificate revocation list, ensure the
crl list is loaded using a
crypto pki import <trustpoint-name> crl
command.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
crl-check enable
Parameters
Usage Guidelines
TLS uses certificates for authentication. CRL (updated with a trustpoint), contains index
numbers of revoked certificates. The CRL checks for any revoked certificates used for
tls
authentication.
Example
RFSwitch(config-radsrv)#crl-check enable
RFSwitch(config-radsrv)#
enable Enables the CRL check