Motorola RF Switch CLI Reference Guide
11-12
11.1.10 password

Trustpoint (PKI) Config Commands
Sets the challenge password (applicable only for requests) to access the trustpoint
Syntax
password [0<password>|2<password>|<password>]
Parameters
Example
RFSwitch(config-trustpoint)#password 0 TestPassword
RFSwitch(config-trustpoint)#
0 <password> Password <password> is specified as unencrypted, the
password should be between 4 to 20 characters
2 <password> Password <password> is encrypted with password-
encryption secret, the string length of encrypted password
should be between 44 - 64 characters
<password> Sets the password to <password> (4 to 20 characters)