Motorola RFS Series

Global Configuration Commands
5-21
5.1.7 country-code
 Global Configuration Commands
Sets the country of operation
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
{no} country-code <code>
Parameters
Usage Guidelines
{no} country-code
erases all existing radio configuration.
Example
RFSwitch(config)#country-code ?
WORD the 2 letter ISO-3166 country code ("show wireless
country-code-list" to see list of supported countries)
RFSwitch(config)#no country-code US
RFSwitch(config)#
<code> A two (2) letter ISO-3166 country code. To view country
codes, use the
show wireless country-code-list
command.