Motorola RF Switch CLI Reference Guide
4-14
4.1.7 cluster-cli
Priv Exec Command
Use this command to access the cluster-cli context. The cluster-cli context provides
centralized management to configure all members of cluster from one member. Any
command executed under this context is executed on all switches in the cluster.
A new context (redundancy) is available to support the cluster-cli. Any commands
executed under this context are executed on each cluster member.
Use
no cluster-cli to exit the cluster-cli context.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
cluster-cli enable
Parameters
Example
RFSwitch#cluster-cli enable
enable Enables the switch cluster context
To Next Page
Loading...
