Motorola RFS Series

RTLS Instance
21-21
• RFS4000
Syntax
sole
Parameters
None
Example
RFSwitch(config-rtls)#sole
RFSwitch(config-rtls-sole)#
21.1.16 switch
 RTLS Config Commands
Configures the switch’s geographical location parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
switch [coordinates|geo-coordinates]
switch coordinates x <0-65535> y <0-65535> z <0-65535>
switch geo-coordinates longitude <-180.00-80.00>
latitude <-90.00 - 90.00>
Parameters
NOTE: sole command instantiates (config-rtls-sole)
sub-instance.
For more details see SOLE Instance on page 24-1.
The prompt changes from RFSwitch(config-rtls)# to
RFSwitch(config-rtls-sole)