Motorola RF Switch CLI Reference Guide
20-10
20.1.3 adopt-unconf-radio
Wireless Configuration Commands
Adopts a radio (even if not yet configured). Default templates are used for configuring the
adopted radio
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
adopt-unconf-radio enable
Parameters
None
Usage Guidelines
Use the {no} adopt-unconf-radio command to switch off adopting unconfigured
radios.
Example
RFSwitch(config-wireless)#adopt-unconf-radio enable
RFSwitch(config-wireless)#
To Next Page
Loading...
