Motorola RFS Series

Common Commands
2-125
2.1.43 wlan-acl
 Common to all modes
Displays the WLAN based access control list information
Syntax
show wlan-acl [<1-256>|all]
Parameters
Example
RFSwitch>show wlan-acl 20
WLAN port: 20
Inbound IP Access List :
Inbound MAC Access List :
Outbound IP Access List :
Outbound MAC Access List :
RFSwitch>
RFSwitch>show wlan-acl all
WLAN port: 1
Inbound IP Access List :78
Inbound MAC Access List :200
Outbound IP Access List :78
Outbound MAC Access List :200
RFSwitch>
wlan-acl [ <1-256>|all] Displays WLAN based access control list information
• <1-256> – Displays ACLs attached to the specified
WLAN ID
• all – Displays all ACLs attached to a WLAN port