Motorola RF Switch CLI Reference Guide
8-8
8.1.6 service

Crypto Peer Config Commands
Invokes service commands to troubleshoot or debug the (config-crypto-peer)
instance configuration
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
service show cli
Parameters
Example
RFSwitch(config-crypto-peer)#service show cli
Crypto Peer Config mode:
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-end [end]
+-exit [exit]
+-help [help]
+-no
+-set
+-aggressive-mode
+-password [no set aggressive-mode password]
+-quit [quit]
+-s
+-commands [show commands]
+-WORD [show commands WORD]
+-running-config [show running-config]
+-full [show running-config full]
+-include-factory [show running-config include-factory]
....................................
RFSwitch(config-crypto-peer)#
cli Displays the CLI tree of current mode