Extended ACL Instance
The Extended ACL instance (config-ext-nacl) is used to manage the extended
Access Control List entries associated with the switch.
To navigate to this instance, use the command
RFSwitch(config)#ip access-list extended [<ACL-name>|
<100-199>|<2000-2699>]
RFSwitch(config-ext-nacl)#
15.1 Extended ACL Config Commands
Table 15.1 summarizes config-ext-nacl commands:
Table 15.1 Extended ACL Config Command Summary
Command Description Ref.
clrscr Clears the display screen page 15-3
deny Specifies packets to reject page 15-4
exit Ends the current mode and moves to the previous
mode
page 15-13
help Displays the interactive help system page 15-14
mark Specifies packets to mark page 15-15
no Negates a command or sets its defaults page 15-21
To Next Page
Loading...
Need help?
General
