Motorola RF Switch CLI Reference Guide
3-12
3.1.9 telnet
User Exec Commands
Opens a telnet session
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
telnet <IP> port
Parameters
Example
RFS7000>telnet 172.16.10.3
Entering character mode
Escape character is '^]'.
RFS6000 release 4.0.0.0-037D
Login as 'cli' to access CLI.
RFS6000 login:
telnet <IP> port Defines the IP address or hostname of a remote system
• port – Displays TCP port number
To Next Page
Loading...
