Motorola RFS Series

AAP IP Filtering
27-5
27.1.3 deny
 AAP IP Filter Config Commands
Specifies packets to reject
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
deny [all|icmp|tcp|upd|protocol]
deny [all|icmp|tcp|udp] [any|src-start-ip <IP> src-end-ip
<IP>] [any|dst-start-ip <IP> dst-end-ip <IP>]
[all|dst-start-port <1-65535> dst-end-port <1-65535>] rule
<1-20>
deny protocol <1-254> [any|src-start-ip <IP> src-end-ip
<IP>] [any|dst-start-ip <IP> dst-end-ip <IP>]
[all|dst-start-port <1-65535> dst-end-port <1-65535>] rule
<1-20>