Interface Instance
12-37
12.1.22 tunneling

Interface Config Commands
Sets protocol-over protocol tunneling.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
tunnel [de
stination <
A.B.C.D>|s
ource <A.B.
C.D>|ttls
<1-255>]
Parameters
Example
RFS6000(config-if)#tunnel destination 1.2.6.3
RFS6000(config-if)#
destination <A.B.C.D> Destination of the tunnel packet.
•
<A.B.C.D> – Speci
fies the IP addr
ess of the
destination.
source <A.B.C.D> Source of tunnel packets.
•
<A.B.C.D> – Specifies the IP
address of the sou
rce.
ttl<1-255> Sets time to live.
To Next Page
Loading...
Need help?
General
