Motorola RFS Series

Motorola RF Switch CLI Reference Guide
21-22
Example
RFSwitch(config-rtls)#switch coordinates x 121 y 121 z 135
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#switch geo-coordinates longitude 120
latitude 70
RFSwitch(config-rtls)#
21.1.17 zone
 RTLS Config Commands
Configures the zone. Maximum of 16 zones can be configured for a site.
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
zone <1-48> [name <name>|perimeter x <0-65535> y <<0-65535> ]
coordinates x <0-65535>
y <0-65535> z <0-65535>
Configures switch coordinates within the site
• x <0-65535> – Configures X coordinate
• y <0-65535> – Configures Y coordinate
• z <0-65535> – Configures Z coordinate
longitude <-180.00-
80.00> latitude
<-90.00 - 90.00>
Configures switch geographic coordinates
• longitude <-180.00-180.00> – Configures longitude, in
degrees, for switch
• latitude <-90.00-90.00> – Configures latitude, in
degrees, for switch