Motorola RFS Series User Manual

Wireless Instance
20-41
20.1.20 debug
 Wireless Configuration Commands
Debugging functions for the Cellcontroller (wireless)
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
debug cc [access-port|all|alt|ap-containment|ap-detect|
capwap|cluster|config|dot11|eap|ids|kerberos|l3-mob|loc-ap|
loc-mu|media|mobile-unit|radio|radius|self-heal|smart|snmp|
system|wips|wisp|wlan] {debug|err|info|warn}
Parameters
access-port
Sets the parameters for the access-port logs
all
Sets the parameters for all the modules
alt
Sets the parameters for the address lookup logs
ap-containment
Sets the parameters for the ap-containment logs
ap-detect
Sets the parameters for the Rogue AP detection logs
capwap
Sets the parameters for the CAPWAP logs
cluster
Sets the parameters for the cluster related logs
config
Sets the parameters for the configuration change logs
dot11
Sets the parameters for the datapath logs
eap
Sets the parameters for the 802.11x eap logs
ids
Sets the parameters for the intrusion detection logs
kerberos
Sets the parameters for the kerberos logs
l3-mob
Sets the parameters for the Layer-3 mobility logs

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English