Motorola RFS Series

Motorola RF Switch CLI Reference Guide
25-4
Parameters
Example
RFSSwitch(config-wireless-smart-rf)#auto-assign all enable
RFSSwitch(config-wireless-smart-rf)#auto-assign channel
enable
RFSSwitch(config-wireless-smart-rf)#auto-assign detector
enable
RFSSwitch(config-wireless-smart-rf)#auto-assign power enable
RFSSwitch(config-wireless-smart-rf)#auto-assign rescuer
enable
25.1.3 clrscr
 Smart RF Instance
Clears the display screen
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
clrscr
Parameters
None
Example
RFSwitch(config-wireless-smart-rf)#clrscr
auto-assign
[all|channel|detector|po
wer|
rescuer] enable
Enables individual RF parameters to be auto-assigned
• all - Enables auto-assign for all the RF parameters
• channel enable - Enables auto-assign for channels
• detector enable - Enables auto-assign for detectors
• power enable - Enables auto-assign for power
• rescuer enable - Enables auto-assign for rescuer