Motorola RF Switch CLI Reference Guide
2-100
2.1.42 wireless

Common to all modes
Displays the wireless configuration parameters and information
Syntax
show wireless [aap-version|ap|ap-containment|
ap-detection-config|ap-images|ap-radio-config|
ap-unadopted||authorized-aps|
channel-power|client|config|country-code-list|default-ap|fw|
hotspot|hotspot-config|ids|ignored-aps|known|mac-auth-
local|mesh|mobile-unit|multicast-packet-limit|
non-preferred-ap-attempts-threshold|phrase-to-key|
qos-mapping|radio|radio-group|regulatory|self-heal-config
|sensor|smart-rf|unauthorized-aps|wips|
wireless-switch-statistics|wlan]
show wireless aap-version
show wireless ap[<LIST>|config [<1-1024>|<MAC>]
show wireless ap-containment [config|table]
show wireless ap-detection-config
show wireless ap-images
show wireless ap-unadopted
show wireless ap-radio-config <MAC>
show wireless approved-aps
show wireless authorized-aps
show wireless channel-power [11a|11b|11bg] [indoor|outdoor]
show wireless client [exclude-list|include-list]
show wireless config
show wireless country-code-list
show wireless default-ap
show wireless hotspot query
show wireless hotspot-config <1-32>
show wireless ids [filter-list|configured-bad-essids
|configure-ap-def-essids|fake-ap-flood threshold|
suspicious ap signal-strength-threshold]
show wireless ignored-aps
show wireless known {ap statistics {<1-1024>}}
show wireless mac-auth-local {<1-1000>}
The radio-group range differs from switch to switch.
• RFS7000 – Supports a range between 0-255
• RFS6000 – Supports a range between 0-64
• RFS4000 – Supports a range between 1-6
To Next Page
Loading...
Need help?
General
