Motorola RFS Series

Motorola RF Switch CLI Reference Guide
25-26
Example
RFSwitch(config-wireless-smart-rf)#service show cli
Smart-RF Configuration mode:
+-assignable-power-range
+-<4-20>
+-<4-20> [assignable-power-range <4-20> <4-20>]
+-auto-assign
+-all
+-enable [auto-assign
(detector|channel|power|rescuer|all) enable]
+-channel
+-enable [auto-assign
(detector|channel|power|rescuer|all) enable]
+-detector
+-enable [auto-assign
(detector|channel|power|rescuer|all) enable]
+-power
+-enable [auto-assign
(detector|channel|power|rescuer|all) enable]
+-rescuer
+-enable [auto-assign
(detector|channel|power|rescuer|all) enable]
+-clrscr [clrscr]
+-end [end]
+-exit [exit]
+-extensive-scan
+-enable [(smart-rf-module|verbose|extensive-scan) enable]
• assign-prepare – Prepares assignment
• assign-rescuers – Assigns rescuers along with
recovering power
• collect-data – Collects site measurement data
• prepare-detectors – Prepare prior to assign
detectors
• pull-rf-config – Pull RF-configuration from cluster
members
• push-rf-config – Push Rf-configuration to cluster
members
• sync-rf-config – Sync RF-configuration of cluster
members