Motorola RFS Series

Motorola RF Switch CLI Reference Guide
25-28
• RFS7000
• RFS6000
• RFS4000
Syntax
show <parameters>
show wireless smart-rf [calibration-status|configuration|
history |radio]
show wireless smart-rf calibration-status
show wireless smart-rf configuration
show wireless smart-rf history
show wireless smart-rf radio [config|local-status|map|
master-status|neighbors|spectrum]
show wireless smart-rf radio config[<1-4096>|MAC_ADDRESS
|all-11a|all-11bg]
show wireless smart-rf radio local-status[<1-4096>|
MAC_ADDRESS|all-11a|all-11bg]
show wireless smart-rf radio map [MAC_ADDRESS|all-11a|
all-11bg]
show wireless smart-rf radio master-status [MAC_ADDRESS|
all-11a|all-11bg]
show wireless smart-rf radio neighbors [MAC_ADDRESS|
all-11a|all-11bg]
show wireless smart-rf radio spectrum [MAC_ADDRESS|
all-11a|all-11bg]
Parameters
SWITCH NOTE: The following commands display only for
RFS6000 and RFS4000:
• power
The following commands display only for RFS7000 and RFS4000:
• port-channel
• static-channel-group
?
Displays the parameters for which information can be
viewed using the show command