Motorola RF Switch CLI Reference Guide
25-30
snmp-server Display SNMP engine parameters
spanning-tree Display spanning tree information
startup-config Contents of startup configuration
static-channel-group static channel group membership
service-list List of services
terminal Display terminal configuration
parameters
timezone Display timezone
traffic-shape Display traffic shaping
upgrade-status Display last image upgrade status
users Display information about currently
logged in users
version Display software & hardware version
virtual-ip IP Redundancy Feature
wireless Wireless configuration commands
wlan-acl wlan based acl
RFSwitch(config-wireless-smart-rf)#show wireless ? aap-
version The minimum Adaptive firmware
version string
ap Status of adopted access-port
ap-containment Rogue AP Containment
ap-detection-config Detected-AP Configuration
Parameters
ap-images List of access-port images on
the wireless switch
ap-unadopted List of unadopted access-port
approved-aps Approved APs seen by access-
port scans
channel-power List of available channel and
power levels for a radio
client wireless client configuration
config Wireless Configuration
Parameters
country-code-list List of supported country
names and 2 letter IS0 3166 codes
default-ap Information for default
access-port
hotspot-config Wlan hotspot configuration
ids Intrusion detection parameters
known Known AP related parameters
mac-auth-local list out the mac-auth-local
entries
mesh Mesh related parameters
mobile-unit Details of associated mobile-
units
To Next Page
Loading...
Need help?
General
