Motorola RFS Series

Motorola RF Switch CLI Reference Guide
26-10
26.1.6 ip
 Role Config Commands
Sets IP parameters for the role
Supported in the following platforms:
• RFS6000
• RFS7000
• RFS4000
Syntax
ip access-group [<1-99>|<100-199>|<1300-1999>|
<2000-2699>|<WORD>] [in|out] acl-precedence <1-100>
Parameters
Example
RFSwitch(config-role)#ip access-group 8 in acl-precedence
RFSwitch(config-role)#
access-group
[<1-99>|
<100-199>|<1300-1999>|
<2000-2699>|<WORD>]
[in|out] acl-precedence
<1-100>
Sets the ACL precedence for the following ACL List entries
• <1-99> – IP standard access list
• <100-199> – IP extended access list
• <1300-1999> – IP standard access list (expanded range)
• <2000-2699> – IP extended access list (expanded range)
• <word> – IP access list name
• in – Apply grouping to incoming packets
• out – Apply grouping to outgoing packets
• acl-precedence <1-100> – Sets ACL precedence to a
value between 1 and 100