Motorola RF Switch CLI Reference Guide
27-12
27.1.7 no
AAP IP Filter Config Commands
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
no rule <1-20>
Negates all the rules applicable on the AAP.
Parameters
Usage Guidelines
Removes a rule entry. Provide the rule-precedence value when using the no command.
Example
RFSwitch(config-aap-ipfilter)#no rule 3192.168.2.0/24 any
rule10
RFSwitch(config-aap-ipfilter)#
rule <1-20> Specifies rule to reject
To Next Page
Loading...
