Motorola RFS Series

Common Commands
2-149
2.1.62 virtual-IP
 Global Config Mode
Displays all the virtual-IPs present in the configuration
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
show virtual-ip [config|status]
Parameters
Example
RFS7000>show virtual-ip status
VIP State : VIP_ST_INIT
VIP Status : Disabled
Cluster Redundancy Status : Disabled
Advertisement Length : 0
Total Advertisements Sent : 0
Total Number of Peers : 0
Total Learning Advts Sent : 0
Total Advertisements Recvd : 0
Reserved VMAC Address Range : 00-15-70-88-8A-90 to 00-15-
70-88-8B-8F
Used VMAC Address Range : 00-15-70-88-8A-90 to 00-15-
70-88-8A-90
Available VMAC Address Count : 256
Used VMAC Address Count : 0
DHCP Server status : Not Running on this Switch
============================================================
Vlan | Priority | SwitchID | State | Advt sent | Advt
recvd
RFS7000>
show virtual-ip
[config|status]
Displays all the virtual-ip’s present in the configuration.
• config – Displays the configuration details.
• status – Displays current status of the switch.