Global Configuration Commands
5-3
dns-whitelist Specifies a list of hosts (IPs or DNS names) for which
Internet access is allowed to hotspot users before
authentication.
page 5-54
interface Defines an interface to configure page 5-55
ip Internet Protocol (IP) page 5-57
license Sets license management commands page 5-69
line Configures a terminal line page 5-70
local Sets the username and password for local user
authentication
page 5-71
logging Modifies message logging facilities page 5-72
mac Configures MAC access-lists page 5-75
mac-address-
table
Configures MAC address table page 5-76
mac-name Sets a name to the MAC address of a MU page 5-77
management Sets properties of the management interface page 5-78
no Negates a command or set its defaults page 2-5
ntp Configures Network Time Protocol (NTP) parameters page 5-79
prompt Sets the system prompt page 5-84
radius-server Enters the RADIUS server mode page 5-85
ratelimit Sets the rate limit feature parameters page 5-87
redundancy Configures redundancy group parameters page 5-88
role Sets the Role Based Firewall parameters page 5-91
rtls Configures Real Time Location System parameters page 5-93
Table 5.1 Global Config Mode Command Summary
Command Description Ref.
To Next Page
Loading...
