Motorola RFS Series

Motorola RF Switch CLI Reference Guide
5-8
For Extended IP ACLs:
access-list [<100-199>|<2000-2699>] [deny|permit|mark]
[icmp|ip|tcp|upd]
access-list [<100-199>|<2000-2699>] [deny|permit|mark] icmp
[<source-IP/Mask>|any|host <IP>] [<dest-IP/Mask>|any|host
<IP>] {<ICMP-type> {<ICMP-code>}} {log} {rule-precedence <1-
5000>}
access-list [<100-199>|<2000-2699>] [deny|permit|mark]ip
[<source-IP/Mask>|any|host <IP>] [<dest-IP/Mask>|any|host
<IP>] {log} {rule-precedence <1-5000>}
access-list [<100-199>|<2000-2699>] [deny|permit|mark]
[tcp|udp] [<source-IP/Mask>|any|host <IP>] {eq
<source-port>|range <starting-source-port>
<ending-source-port>} [<dest-IP/Mask|any|host <IP>]
{eq <source-port>} {range <starting-source-port>
<ending-source-port>} {log} {rule-precedence <1-5000>}
NOTE Using access-list [<100-199>|<2000-2699>] moves you to the
(config-ext-nacl) instance. For additional information, see
Extended ACL Instance on page 15-1.
Using
access-list [<1-99>|<1300-1999>] moves you to the
(config-std-nacl) instance. For additional information, see
Standard ACL Instance on page 16-1.
To create a named ACL, use
ip access-list (Standard/Extended). For
more information, see ip on page 5-57.