Motorola RF Switch CLI Reference Guide
5-38
5.1.9 do
Global Configuration Commands
Runs commands from either the User Exec or Priv Exec mode
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
do <privilege mode commands>
Parameters
None
Example
RFSwitch(config)#do ping 157.235.208.69
PING 157.235.208.69 (157.235.208.69): 100 data bytes
128 bytes from 157.235.208.69: icmp_seq=0 ttl=64 time=0.1 ms
128 bytes from 157.235.208.69: icmp_seq=1 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=2 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=3 ttl=64 time=0.0 ms
128 bytes from 157.235.208.69: icmp_seq=4 ttl=64 time=0.0 ms
--- 157.235.208.69 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.0/0.0/0.1 ms
RFSwitch(config)#
NOTE: In the example above, ping is a PRIV EXEC command.
To Next Page
Loading...
