Motorola RFS Series

Global Configuration Commands
5-57
5.1.17 ip
 Global Configuration Commands
Configures a selected Internet Protocol (IP) component
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ip [access-list|default-gateway|dhcp|domain-lookup|
domain-name|dos|http|http-https|igmp|local|name-
server|nat|route|
routing|ssh|telnet]
ip [domain-lookup|routing]
ip access-list [standard|extended]
ip access-list extended [<100-199|<2000-2699>|<acl-name>]
ip access-list standard [<1-99>|<1300-1999>|<acl-name>]
ip default-gateway <IP>
ip dhcp [bootp|class|excluded-address|option|ping|pool]
ip dhcp bootp ignore
ip dhcp class <class-name>
NOTE: Using access-list extended moves you to the
(config-ext-nacl) instance. For more information, see
Chapter , Extended ACL Instance.
Using
access-list standard moves you to the (config-std-
nacl) instance. For more information, see
Chapter , Standard ACL Instance.
Using
ip dhcp pool <pool-name> command to move to the
(config-dhcp) instance. For additional information, see
Chapter , DHCP Server Instance.
Using
ip dhcp class <class-name> moves you to the
(config-dhcpclass) instance. For additional information, see
Chapter , DHCP Class Instance.