Motorola RF Switch CLI Reference Guide
5-86
Usage Guidelines
The RADIUS server host is used to configure RADIUS server details. These details are
required for management user authentication if AAA authentication has been defined as
RADIUS
Example
RFSwitch(config)#radius-server local
RFSwitch(config-radsrv)#
retransmit <1-100> Specifies the number of retries to active server.
• <0-100> – Number of retries for a transaction
(default is 3)
timeout <1-1000> Time to wait for a RADIUS server to reply.
• <1-1000> – Wait time (default 5 seconds)
To Next Page
Loading...
