Global Configuration Commands
5-95
diag [enable|limit|period|
tech-support-period|
tech-support-url]
Services diagnostics configuration.
• enable – Enable in service diagnostics
• limit – Displays diagnostic limit command
• period <100-30000> – Sets diagnostics period
• tech-support-period <10-10080> – Sets the tech support
period. Default is 1440 minutes (1day).
• tech-support-url <URL> – Sets the tech support URL to
<URL>. This is used during auto generated tech support
dumps
password-encryption
secret 2 <secret>
Encrypts passwords in configuration.
• secret 2 <secret> – Encrypt passwords with secret
phrase
• 2 – Type of encryption SHA256-AES256
• <secret> – Passphrase for encryption
pm sys-restart Process Monitor.
• sys-restart – Enable PM to restart the system when a
processes fails
Note: The process restart is one count less than what is
configured.
prompt crash-info Enables crash-info prompt
radius {restart} Enables RADIUS server.
• restart – Restarts the RADIUS server
redundancy dynamic-ap-
load-balance start
Starts Dynamic AP Load Balancing service for redundancy
support
To Next Page
Loading...
