Global Configuration Commands
5-99
Parameters
authenticate enable Enables SMTP Server authentication
enable traps [all|
dhcp-server|diagnostics|
miscellaneous|mobility|
nsm|radius-server|
redundancy|snmp
|wireless]
Enables SMTP notification for traps
• all – Enables SMTP Notification for all traps
• dhcp-server [dhcpServerDown|dhcpServerUp]– Enables
dhcp-server traps
• dhcpServerDown – DHCP Server down
• dhcpServerUp – DHCP Server up
• diagnostics
[cpuLoad15Min|cpuLoad1Min|cpuLoad5Min|
fanSpeedLow|fileDescriptors|ipRouteCache|
packetBuffers|processMemoryUsage|ramFree|
tempHigh|tempOver|usedKernelBuffer] – Enables
diagnostics traps
• cpuLoad15Min – Average CPU load for last 15
minutes exceeds limit
• cpuLoad1Min – Average CPU load for last minute
exceeds limit
• cpuLoad5Min – Average CPU load for last five
minutes exceeds limit
• fanSpeedLow – Fan speed below limit.
• fileDescriptors – File descriptor number exceeds limit.
• ipRouteCache – IP route cache size exceeds limit
• packetBuffers – Packet buffer usage exceeds limit
• processMemoryUsage – Processor memory usage
exceeds limit
• ramFree – RAM free space below limit.
• tempHigh – Temperature exceeds high limit
• tempOver – Temperature exceeds critical limit
• usedKernelBuffer – Kernel buffer usage exceeds limit
for some buffer size