Motorola RFS Series

Interface Instance
12-11
12.1.8 ip
 Interface Config Commands
Sets the IP address for the assigned Fast Ethernet interface (ME), and VLAN Interface
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ip [access-group|address|arp|dhcp|helper-address|nat]
ip access-group [<1-99>|<100-199>|<1300-1999>|
<2000-2699>|WORD in]
ip arp [rate-limit|trust]
ip dhcp trust
ip address [<IP/Mask> {secondary}|dhcp]
ip helper-address <IP> ip nat [inside|outside]
Parameters
access-group
[<1-99>|
<100-199>|
<1300-1999>|
<2000-2699>]
Defines the access group
• <1-99> – Sets the IP standard access list
• <100-199> – Sets the IP extended access list
• <1300-1999> – Sets the IP standard access list
(expanded range)
• <2000-2699> – Sets the IP extended access list
(expanded range)
• WORD in – Defines the access list name
• in – Sets incoming packets