Motorola RF Switch CLI Reference Guide
2-6
arp Address Resolution Protocol (ARP)
access-list Configure access-lists
autoinstall autoinstall configuration command
banner Reset login banner to nothing
bridge Bridge group commands
country-code Clear the currently configured country
code. All existing configurations will be erased
crypto encryption module
errdisable errdisable
firewall Wireless firewall
ftp Configure FTP Server
hostname Reset system's network name to default
interface Delete a virtual interface
ip Internet Protocol (IP)
line Configure a terminal line
local Local user authentication database for VPN
logging Modify message logging facilities
mac MAC configuration
mac-address-table Configure MAC address table
mac-name Remove a configured MAC Address name
management sets properties of the management interface
network-element-id Reset system’s network element
ntp Configure NTP
prompt Reset system's prompt
radius-server RADIUS server configuration commands
ratelimit ratelimit
role Configure role parameters
redundancy Configure redundancy group parameters
service Service Commands
smtp-notification Modify SMTP-Notification parameters
snmp-server Modify SNMP engine parameters
spanning-tree Spanning tree
timezone Revert the timezone to default (UTC)
traffic-shape Traffic shaping
username Establish User Name Authentication
vpn vpn
virtual-ip Virtual IP
wlan-acl Remove an ACL from WLAN
white-list Host Whitelist
wlan-acl Remove an ACL from WLAN
wwan Wireless WAN interface
RFSwitch(config)#no
To Next Page
Loading...
Need help?
General
