Motorola RFS Series

Motorola RF Switch CLI Reference Guide
14-8
14.1.6 no
 DHCP Server Class Config Commands
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
no [multiple-user-class|option]
np option user-class <class-name>
Parameters
Example
RFSwitch(config-dhcpclass)#no multiple-user-class
RFSwitch(config-dhcpclass)#
multiple-user-class
Disables the multiple user class option
option user-class
<class-name>
Modifies the parameters of existing DHCP server options
• user-class <class-name> – Configures DHCP-Server user
class options
• <class-name> – ASCII value of user-class option