Motorola RFS Series User Manual

Motorola RF Switch CLI Reference Guide
18-28
18.1.21 no
 DHCP Config Commands
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
no [address|bootfile|class|client-identifier|client-name|
ddns|default-router|dns-server|domain-name|hardware-address|
host|lease|netbios-name-server|netbios-node-type|network|
next-server|option|update|unicast-table]
Parameters
The no command negates any command associated with it. Wherever required, use the
same parameters associated with the command getting negated.
Example
RFSwitch(config)#no ip dhcp pool hotpool
RFSwitch(config)#
RFSwitch(config)#no ip dhcp pool test
RFSwitch(config)#
RFSwitch(config-dhcp)#no update dns
RFSwitch(config-dhcp)#

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English