Radius Server Instance
19-5
19.1.2 ca
Radius Configuration Commands
Configures CA (Certificate Authority) parameters
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
ca trust-point <trustpoint-name>
Parameters
Usage Guidelines
Configures the trustpoint used by the local RADIUS server. Create the trustpoint before
it can be used by the
crypto pki trustpoint command.
The default trust point in use is –
default-trustpoint.
Example
RFSwitch(config)#radius-server local
RFSwitch(config-radsrv)#ca trust-point tp1
RFSwitch(config-radsrv)#
trust-point
<trustpoint-name>
Defines the trustpoint configuration
• <trustpoint-name> – Displays the existing trustpoint
name
To Next Page
Loading...
