Motorola RFS Series User Manual

Motorola RF Switch CLI Reference Guide
19-28
19.1.10 ldap-group-verification
 Radius Configuration Commands
Enables or disables the group verification setting. By default, this is enabled.
Supported in the following platforms:
RFS7000
RFS6000
RFS4000
Syntax
ldap-group-verification [disable|enable]
Parameters
Example
RFS6000(config-radsrv)#ldap-group-verification disable ?
disable Disables the group verification setting
enable Enables the group verification setting.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English