Wireless Instance
20-67
Example
RFSwitch(config-wireless)#qos-mapping wireless-to-wired
background dot1p 5
RFSwitch(config-wireless)#
wireless-to-wired
[tid0|tid1|tid2|tid3|
tid4|tid5|tid6|tid7]
dot1p <0-7>
Mappings used while switching wireless traffic to the
wired side.
• tid0, tid3– best effort category traffic
• tid1, tid2 – background category traffic
• tid4, tid5 – video traffic category traffic
• tid6, tid7 – voice traffic category traffic
• dot1p <0-7> – Configures the mapping of 802.1p tags to
access categories. You can specify more than one 802.1p
tags with in the range 0 and 7
To Next Page
Loading...
