Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-96
show [cli|
radio-neighbor||smart-rf|
wireless]
Displays the current running system information for this
mode.
• cli – Shows the CLI commands available in this mode
• radio-neighbor mu <MAC> – Displays neighboring radios
for a station
• mu – Specify the MAC address of the MU.
• <MAC> – Displays MAC address in AA-BB-CC-DD-EE-
FF format
• smart-rf [debug-config|sensitivity] – Displays smart-rf
management commands
• debug-config – Displays smart-rf debug configuration
information
• sensitivity [mu|pattern|rates] – Displays the smart-rf
sensitivity table
• mu {[<0-8192>|<MAC>]} – Displays smart-rf
sensitivity information for a selected MU
• <0-8192> – Optional. MU index
• <MAC> – Optional. MU MAC address
• pattern [pattern-11a|pattern-11b|pattern-11bg|
pattern-2-mbps] – Displays smart-rf common MU
patterns
• pattern-11a – 11a MUs
• pattern-11b – 11b MUs
• pattern-11bg – 11bg MUs
• pattern-2-mbps – 2-Mbps units
• rates <rate-flag> – Displays rates. <rate-flag> is in
hexadecimal format
• wireless [ap-history|buffer-counters|enhanced-beacon-
table|enhanced-probe-table|group|group-stats|legacy-
load-balance|mu -cache-buckets|mu-cache-entry|mvlan
radio|radio-cache-entry|radio-hash-buckets|snmp-trap-
throttle|vlan-cache-buckets|vlan-cache-entry|waiting] –
Displays wireless parameters