Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-124
For each of the options <1-256> and <wlan-list> the following commands are available.
80211-extensions
move-command enable
Enables support for 802.11 extensions
• move-command – Enables support for fast roaming
• enable – Enables this extension
802.11w-mfp optional
required sa-query
Enables 802.11w Management frame protection settings
• optional – MFP optional
• required – MFP required
• sa-query [max-timeout|retry-timeout] – Enables SA
Query protocol settings
• max-timeout – Displays maximum timeout
• retry-timeout – Displays retry timeout
aap-proxy-radius enable
realm <realm-name>
strip
Enables configuring of proxying AAP RADIUS requests.
• realm <realm-name> – Provide proxy realm name
• strip – Strip realm name while proxying requests
accounting
[none|radius|syslog]
Defines the accounting configuration on this WLAN
• none – No accounting performed on this WLAN
• radius – Uses RADIUS accounting on this WLAN
• syslog – Uses Syslog accounting on this WLAN
acl exceed-rate mu-
denied-traffic
<0-1000000>
disassociate
Sets the actions taken based on the ACL configuration.
• exceed-rate – Action is taken when rate exceeds a set
value
• mu-denied-traffic – The action is to deny traffic to the
MU
• <0-1000000> – The rate of packets / second after
exceeding which the traffic from the MU is denied
access
• disassociate – When enabled, the MU is disassociated