Motorola RF Switch CLI Reference Guide
20-128
• second-key [enable|key|phrase] – Configures a secondary
set of key/passphrase for this WLAN
• enable – Enables the use of a secondary
key/passphrase
• key [0 <secret-key>|2 <secret-key>|<secret-key>] –
Configures the key (PMK)
• phrase [0 <secret-key>|2 <secret-key>|<secret-key>] –
Configures the passphrase
• 0 <secret-key>– Password is specified as unencrypted
• 2 <secret-key>– Password is encrypted with password-
encryption secret
• <secret-key> – Sets the 256bit (64 hex characters) key.
• tkip-cntrmeas-hold-time <0-65535> – Configures the
hold-time (in seconds) that clients are blocked when TKIP
counter measures are invoked. Default is 60 seconds
• wpa2-tkip enable – Enables support for WPA2-TKIP (in
addition to WPA-TKIP) when TKIP is enabled on this
WLAN
enable Enables specified WLAN(s).
To Next Page
Loading...
