Motorola RFS Series

Wireless Instance
20-131
• pre-auth-vlan <1-4096> – Configures default vlan to be
used until users get authorized. Specify the index of the
vlan
• max-login-attempts <0-10> – Modifies hotspot maximum
login attempts
• <0-10> – Login attempts between 0-10
• query [<1-10>|<query-list>] – Specifies queries to be
appended to redirection URL
• <1-10> – A single index
• <query-list> – A list of indices
• redirect-to-hostname – Use the Hostname/System-Name
in the redirection URL instead of the IP address of the
switch
• simultaneous-users <0-8192> – Specifies how many
simultaneous MAC address can be allowed for a given
end user
• <0-8192> – The number of MAC addresses that are
allowed to use that username at the same time. 0
implies disabling of the checks
• webpage external [failure|login|noservice|welcome]
<URL> – Modifies hotspot page parameters
• external – Modifies a hotspot’s External web page
• failure – Users are redirected to this web page when
their authentication attempt fails.
• login – Users are prompted for their username and
password on this web page.
• noservice – Users are redirected to this web page
when a critical resource such as the RADIUS server
is not available.
• welcome – Users are redirected to this web page
when they are authenticated successfully.
• <URL> – Sets the path to the file to be displayed