EasyManua.ls Logo

Motorola RFS Series

Motorola RFS Series
1054 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wireless Instance
20-137
nac-server
[primary|secondary|
timeout]
Configure a NAC server IP address and an optional
authentication port number.
[primary|secondary] [<IP> {auth-port <port>}|radius-key
[0 <secret>|2 <secret>|<secret>]] – Primary server or
secondary server’s IP address
<IP> {auth-port <port>} – Set an EAP server IP address
and optional EAP server authentication port (default:
is 1812)
radius-key [0 <secret>|2 <secret>|<secret>] – Create a
Radius server shared secret, up to 127 characters
0 <secret> – Password is specified as unencrypted
2 <secret> – Password is encrypted with password-
encryption secret
<secret> – Configures a NAC server shared secret
timeout <1-300> retransmit <1-100> – Sets the time the
switch waits for a response from the RADIUS server
before retrying. This is a global setting for both the
primary and secondary servers. The default timeout is 3
sec.
retransmit <1-100> – Number of retries before the
wireless switch will give up and disassociate mobile
unit
<1-100> – Retry count. The default value is 3.
Note: The RFSwitch(config-wireless)# nac-server
timeout<*> retransmit<*>
should be less than what is
defined for an MU’s timeout and retries. If the MU’s time is
less than the server’s, a fallback to the secondary server will
not work.
nas-id <nas-id> The nas-id of this wlan to be sent to the RADIUS server.
Maximum length of 256 characters.
nas-port-id <port> The nas-port-od of this wlan to be sent to the RADIUS
server. Maximum length of 256 characters.

Table of Contents

Other manuals for Motorola RFS Series

Related product manuals