Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-146
Example
RFSwitch(config-wireless)#wlan 25 accounting syslog
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#wlan 25 answer-bcast-ess
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#wlan 25 authentication-type
kerberos
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#wlan 25 description "TestWLAN"
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#wlan 25 dot11i handshake timeout
2500 retransmit 5
RFSwitch(config-wireless)#
wep64 [key|phrase|
wep-default-key]
Configures WEP64 parameters.
•key <1-4> [ascii|hex] – Configures pre-shared hex keys.
• ascii [0 <key>|1 <key>|<key>] – Sets keys as ascii
characters (5 characters for wep64, 13 for wep128)
• hex [0 <key>|1 <key>|<key>] – Sets keys as
hexadecimal characters (10 characters for wep64, 26
for wep128)
• 0 <key> – Password is specified unencrypted
• 2 <key> – Password is encrypted with password-
encryption secret
• <key> – Key (10 hex or 5 ascii characters for wep64,
26 hex or 13 ascii characters for wep128)
• phrase <phrase> – Specifies a passphrase from which
keys are to be derived
• <phrase> – Sets the passphrase (between 4 and 32
characters)
• wep-default-key <1-4> – Defines the key index used for
transmission from AP to MU