Motorola RFS Series

Motorola RF Switch CLI Reference Guide
20-154
Example
RFS7000(config-wireless)#wips event 80211-replay-check-
failure enable authorized
RFS7000(config-wireless)#
RFS7000(config-wireless)#wips event fake-ap-flood threshold
88
RFS7000(config-wireless)#
RFS7000(config-wireless)#wips event ad-hoc-advertising-
authorized-ssid filter-ageout 9
RFS7000(config-wireless)#
For the above parameters, the following values are set.
• enable – Enables monitoring, filtering and triggering
alarms
• filter-ageout <ageout> – Sets the number of seconds
mobile units are filtered in the range <1-86400>
• threshold<1-65535> – Configures the threshold of
events allowed in the detection window
• authorized – Triggers against authorized devices
• ignored – Triggers against ignored devices
• unauthorized – Triggers against unauthorized
devices
reset-to-default Reset to default settings