Motorola RFS Series

Motorola RF Switch CLI Reference Guide
23-10
antenna
[<antenna>|<antenna-
list>] coordinates x <x-
coordinate> y <y-
coordinate> z <z-
coordinate>
Configures the RFID readers antenna. Select a antenna
using its index, between <1-8> or range (eg:3-7) of antenna
indices or any RFID reader antenna
• coordinates - Sets the coordinates for the antenna
• x <x-coordinate> – Configures the x coordinate for the
antenna for the RFID reader
• y <y-coordinate> – Configures the y coordinate for the
antenna for the RFID reader
• z <z-coordinate> – Configures the z coordinate for the
antenna for the RFID reader
reader [<index>|
<reader-index-list>]
antenna [<antenna>|
<antenna-list>] power
<antenna-power>
Configures the RFID reader power
• power – Sets the power
• <antenna-power> – Sets the antenna power to between
<-63 and 63 dBm
reader <index> id <ip> Sets the IP address <ip> for the reader with index <index>
reader <index>
coordinates x
<x-coordinate> y
<y-coordinate>
z <z-coordinate>
Sets the coordinates for the RFID reader
• coordinates - Sets the coordinates for the reader
• x <x-coordinate> – Configures the x coordinate for the
RFID reader
• y <y-coordinate> – Configures the y coordinate for the
RFID reader
• z <z-coordinate> – Configures the z coordinate for the
RFID reader
reader [<index>|<reader-
index-list>] description
<description>
Sets the description of a RFID reader or a list of readers to
<description> (1-32 characters)
reader [<index>|<reader-
index-list>] enable
Enables or connects the RFID reader with the index <index>
or a list of RFID readers <reader-index-list>