Configuring the Internal Baseband Source
R&S
®
SMBV100B
204User Manual 1178.4460.02 ─ 03
"Comment"
Indication of the possible comment contained in the waveform.
"Info"
Indication of the possible comment contained in the waveform.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?
on page 755
Append/Delete/Shift Seg. Up/Down
Standard handling functions:
"Append"
Opens the standard "File Select" dialog for navigation to and selec-
tion of the waveform file to be added on the end of the existing list.
Only non-multi segment waveforms can be loaded.
"Delete"
Removes the selected entry from the table. The waveform file itself is
however not deleted.
"Shift Seg.# Up/Down"
Rearranges the segments, i.e. moves the selected segment up and
down.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend
on page 760
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete on page 760
Blank Segment
Comprises the settings of a blank segment. A blank segment is a zero signal with
defined clock rate and number of samples.
"Clock Rate"
Selects the clock rate of the blank segment.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:BLANk:APPend
on page 758
"Samples"
Selects the number of samples for the blank segment.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:BLANk:APPend
on page 758
"Period"
Displays the resulting period for the blank segment.
"Append Blank"
Adds the blank segment to the multi-segment file.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:BLANk:APPend
on page 758
Generating Multi-Segment Waveform Files
To Next Page
Loading...
